Keeping your home looking great can sometimes feel like a full-time job. After all, there’s almost always something in need of cement repair. This includes repairing concrete steps.

The Repairing Concrete Steps

The concrete steps around your home can become damaged in many different ways. Severe weather such as wind, heavy rains, and snow can chip away over a period of years. Heavy foot traffic can also result in unsightly wear and tear to your repairing concrete steps.

This article takes a look at tips for repairing your home concrete steps that need to be resurfaced. Keep reading to discover insight into how to make your old steps look new again.

1. Clean the Damaged Area for Cement Repair

The first thing you need to do is clean the area on and around the damaged portion of the step. This includes removing any dirt, grit, gravel, sand, or other debris.

2. Make a Form

Now you can make a form around the damaged step.

Use lumber and duct tape to create a 90-degree angle that will help the step maintain its shape once the new cement is poured. The L-shape should be made to fit the exact size and shape of the existing step.

3. Prepare Bucket of Quick-Setting Cement

The next step in concrete stair repair is to moisten the work area with water from a spray bottle and apply a thick coat of latex bonding liquid. Once this is completed, mix quick-setting cement with water in a plastic bucket.

4. Apply Cement

Now carefully pour the cement onto the existing step. Be sure to fill in all open gaps within the wooden form.

It’s important to use enough cement to totally complete the shape of the step and to allow for the material to settle into any gaps that exist beneath the visible surface.

5. Smooth Newly Laid Surface

Once you’ve applied the cement, use a trowel to fully smooth the freshly poured material. Keep in mind that the cement is designed to dry quickly, thus it’s important to smooth the area as fast as possible before the material has time to setup.

6. Allow the Surface to Dry Overnight

Now give the wet surface time to dry. It’s best to let it dry overnight.

Keep in mind that removing the form before the material has fully dried might compromise the shape and structural integrity of the finished step and get the benefits.

7. Remove Form and Keep Surface Moist

Once the cement has had time to dry, carefully remove the wood form from the step. Inspect the step for cracks, dents and other flaws in the completed surface area.

Lastly, it’s important to keep the new surface area moist by spraying with water at least twice a day. Continue this for a week in order to prevent potential cracks from forming in the finished surface.

A Simple Guide for Repairing Concrete Steps

Keeping your home looking great doesn’t have to be complicated. This includes understanding the process for repairing concrete steps. The key is to use this helpful guide and take your time.

Keep scrolling to discover more home improvement tips and advice.