Wooden furniture can enhance your living space by complimenting colors, rooms’ features, and other furniture. However, it is notoriously difficult to maintain because it scratches and stains easily, losing its aesthetic charm over time. Keep your furniture safe use an acrylic table protector.

Therefore, many people have opted for glass table protectors to ensure their wooden furniture’s longevity. Others also purchase more durable and economical options like acrylic are ideal substitutes. Below are some tips on how to make an acrylic table protector.

Steps To Make An Acrylic Table Protector

Measure Out The Table Top Surface

To begin with, you will need to measure the table top’s surface accurately. If possible, this measurement should be down to millimeters for precision sake. You will need a measuring tape, a piece of paper, and a pen to measure and jot down your accurate table recordings. To measure the table top’s surface, place the tape’s tip at the center of the table vertically and stretch it out across to the opposite side. You can use this measurement as the size and diameter for a round table.

Additionally, you can use it as a rectangular tabletop’s width or a square tabletop’s size. Then, write down your measurement on your piece of paper. Also, measure a rectangular tabletop’s length from edge to edge and write down the measurements.

Acquire Your Acrylic Sheet

Getting an acrylic sheet is the all-important next step to take after measuring out your table top’s surface. Luckily, you can easily order acrylic and plexiglass sheets, polycarbonate sheets, or PVC sheets from a reputed online plastic retailer. Generally, it would be best to acquire an acrylic sheet bigger than your table top’s surface. Its dimensions should exceed the table top’s surface in height and width by a few centimeters. This way, you ensure that you have enough material to cover your table top’s surface.

Map Out The Table Top’s Dimensions Unto The Acrylic

Cutting out the tabletop protector’s accurate dimensions from the acrylic material is essential, and it all begins with getting it right in this step. Therefore, use masking tape to make a border on your acrylic material and draw an outline of the tabletop protector’s dimensions on it. However, it is essential to avoid drawing any marks on the acrylic table protector directly, so keep this in mind.

Cut Out The Accurate Dimensions

You will need a sharp hacksaw, band saw, or jigsaw to cut out your acrylic table protector, so you can quickly get one from a hardware store near you. To begin, cut around the outline of your drawn dimensions, leaving a few millimeters of extra space. These few millimeters are vital because the acrylic’s edges will be rough after the hacksaw’s cut, so you can sand the acrylic to smoothen out the edges.

Smoothen Your Table Protector

Finally, use sandpaper to smooth out your acrylic table protector’s edges to give it a fine finish. Many experts recommend using three sandpapers of different grades for this task, starting with the coarsest. Then, save the sandpaper with the finest abrasion for last, ensuring that you get the best possible finish for your tabletop protector.